Support 0-10v Triac Dimmable Led Driver LED Dimming Led Power Supply
Product Feature
A:Dimmable power adapter(Voltage dimming;no additional dimmers needed!)
B:Triac Dimmable Driver(Constant current,0-100% dimmable);pls note the current once you order them
C:0~10V Dimmable Driver(0-100% dimmable,non-flicker,AC100~277V input);pls note the current once you order them
D:Dali Dimmable Driver(0-100% dimmable,non-flicker,AC100~277V input);pls note the current once you order them
E: LED Dimming led power supply(support Triac,1-10V,Push dimming )
F:AC175~265V Covert to DC5V Constant voltage Driver
G:IP68,AC230/110V Covert to AC12V Constant voltage
Product Specification
| Product name: | LED Dimming led power supply | Output Current: | 12.5A or 6.25A |
| Output Type: | Single | Output Power: | 150W |
| Input Voltage: | AC200-240V | Feature: | support Triac,1-10V,potentionmeter dimming |
| Output Voltage: | 12V or 24v | Size: | 286x49x30mm |
| Output Frequency: | 50Hz | Wattage: | 150W |
| Keyword-1: | triac dimmable led driver | PF: | 0.5 |
| Keyword-2: | Push dimming power supply | IP: | 44 |
| Material: | Alumium Alloy | Keyword: | 1-10V dimmable led driver |
1. Instructions for using:
3.1 When using this product, please distinguish the input end and output end of the product first, PRI is the AC input end, ACL is connected to the live line, ACN is connected to the zero line; SEC is the DC output end, LED+ and LED- are respectively connected to the positive and negative poles of the LED lamp ; DA1 and DA2 are connected to the DALI signal line, and there is no need to distinguish between positive and negative.
3.2 This product is a high-voltage high-power LED lamp controller. Please cut off the AC mains before installation. Connect the wiring as shown below, first connect the LED+ and LED-line, then connect the DA1 and DA2 signal lines, and finally connect the ACL and ACN lines.
2.Common faults and treatment methods:
4.1 If the LED light does not work, please cut off the AC Power and check:
a．There is no contact failure at the output terminal;
b．Whether the positive and negative terminals of the output are reversed；
c．There is no contact at the input end,
d. Whether the LED line and the DALI signal line are reversed, after excluding the above faults,pls continue the next step:
4.2 LED lights is working,However, the brightness is abnormal (the LED light is flashing, too bright or too dark), or the light cannot be dimmed. Please cut off the AC input immediately and check whether the output LEDs meet the output parameters of the product (the LED lamp power is too small or too large) , DALI system parameters are set correctly.
FAQ
Q1:Are you a manufacturer?
A: Yes, we are the manufacturer.We have one factory in Shenzhen, Guangdong, China.
Q2:Can I get sample?
A: Sure, If you need sample, pls tell me your spec need, or tell me your led light info, then i will recommend you
suitable led driver with good price, after confirm details, we will arrange the samples for you to test. Welcome sample
order to test and check quality.
Q3:Is it OK to print my logo on led driver & light product and use my own package and trade mark?
A: Yes. Normally we offer white inner box and carton box. Use your own design is ok. Please inform us
formally before our production and confirm the design firstly based on our sample.
Q4: Does your company accept OEM&ODM?
A: Yes, welcome OEM&ODM.
Product Tags:
|
|
Triac Dimmable 0 10V LED Driver LED Dimming Led Power Supply Images
|
